Nortel Networks 114200-E User Manual
Installing and Operating Passport ARN Routers
1-26
114200-E Rev 00
When you have the appropriate equipment, complete the following steps:
1.
Turn on and configure the terminal, using the parameters in
and the terminal user guide.
2.
Turn off the terminal.
3.
Insert the 9-pin receptacle end of the console cable into the ARN Console
connector.
connector.
4.
Attach the null modem crossover adapter to the 25-pin connector.
Insert the screw on the cable connector into the receptacle on the adapter
connector and tighten the screw (refer to
connector and tighten the screw (refer to
).
5.
Attach the 25-pin receptacle connector on the combined cable and
adapter to the console host connector
adapter to the console host connector
Figure 1-22.
Connecting a Terminal Console to an ARN
Table 1-3.
Console Parameters
Parameter
Value
Baud Rate
9600
Data Bits
8
Stop Bits
1
Parity
None
COMM
20 mA
PR
KB
Console cable plus
null modem adapter
null modem adapter
ARN0058A
UL
UL
100-240~
1.2A
50-60Hz
Console
Modem
Redundant Power