Nortel Networks 114200-E User Manual
Installing and Operating Passport ARN Routers
2-2
114200-E Rev 00
When you start the ARN for the first time, it completes an initial startup procedure
to boot and connect to the network using either a default configuration file or one
already customized and available on the network.
to boot and connect to the network using either a default configuration file or one
already customized and available on the network.
summarizes the four options; the sections that follow provide steps for completing
each option.
each option.
Table 2-1.
Summary of Initial Startup Options
Boot
Option
Option
Source for
Image file
Image file
Source for
Configuration
File
Configuration
File
Description and Requirements
EZ-Install
Local
Network
(serial interface
only)
(serial interface
only)
The default option. The ARN boots from local flash
memory, then obtains its configuration file from a remote
workstation that is configured as a Bootstrap Protocol
(BootP) server. The ARN saves the configuration to the
flash memory
memory, then obtains its configuration file from a remote
workstation that is configured as a Bootstrap Protocol
(BootP) server. The ARN saves the configuration to the
flash memory
.
This option requires a High-Level Data Link Control
(HDLC) or frame relay serial connection.
(HDLC) or frame relay serial connection.
Netboot*
* The ARN supports netboot over serial, Ethernet, token ring, and 56/64K DSU/CSU interfaces only.
Local
or
Network
or
Network
Local
or
Network
or
Network
The ARN locates and obtains
at least one startup file from
a remote workstation that is configured as a BootP server.
This option requires a communications connection over
an HDLC, frame relay, Ethernet, token ring, or DSU/CSU
interface, and a local console connection.
This option requires a communications connection over
an HDLC, frame relay, Ethernet, token ring, or DSU/CSU
interface, and a local console connection.
Directed
Netboot†
Netboot†
† The ARN supports directed netboot over serial, Ethernet, token ring, and 56/64K DSU/CSU interfaces only.
Local
or
Network
or
Network
Local
or
Network
or
Network
The ARN obtains
at least one startup file from a remote
workstation that is configured as a Trivial File Transfer
Protocol (TFTP) server. You must specify the IP address
of the TFTP server and the complete path to the startup
files before booting.
This option requires a communications connection over
an HDLC, frame relay, Ethernet, token ring, or DSU/CSU
interface, and a local console connection.
Protocol (TFTP) server. You must specify the IP address
of the TFTP server and the complete path to the startup
files before booting.
This option requires a communications connection over
an HDLC, frame relay, Ethernet, token ring, or DSU/CSU
interface, and a local console connection.
Local Boot Local
Local
The ARN boots from a local software image and generic
startup configuration file. You create a customized
configuration file by running the Quick-Start script.
startup configuration file. You create a customized
configuration file by running the Quick-Start script.
This option requires a local console connection and an
installed BayRS flash memory card. If you attempt to local
boot the ARN/DC without the flash memory card inserted,
the router does not operate.
installed BayRS flash memory card. If you attempt to local
boot the ARN/DC without the flash memory card inserted,
the router does not operate.