Nortel Networks 114200-E User Manual

Page of 166
Installing and Operating Passport ARN Routers
3-8
114200-E Rev 00
FT1/T1 and FE1/E1 DSU/CSU LEDs
 describes the FT1/T1 and FE1/E1 DSU/CSU adapter module LEDs.
X.25 PAD LEDs
 describes the X.25 PAD adapter module LEDs.
V.34 Modem LEDs
 describes the front-panel V.34 modem adapter module LEDs. 
Table 3-12.
FT1/T1 and FE1/E1 DSU/CSU LEDs
LED
Meaning
Red ALM
Lights when the port is in a red alarm state.
Yellow ALM
Lights when the DSU/CSU receives a yellow alarm signal 
from the network.
Loop
Lights when you set the interface to loopback mode.
Synch
Lights when the port is synchronized with the T1/E1 network. 
Table 3-13.
X.25 PAD LEDs
LED
Meaning
TxD
(Transmit Data)
Lights when the X.25 PAD
 
interface transmits data over the 
network.
RxD
(Receive Data)
Lights when the X.25 PAD interface receives data from the 
network.
Note: 
The ARN back-panel supports an optional V.34 Console Modem 
module
 also applies to these LEDs.