Nortel Networks 2700 User Manual
Chapter 2 Cabling the VPN Router and turning the power on 37
Nortel VPN Router Installation — VPN Router 2700
shows the back of the VPN Router 2700. All interface cables and the
power cord attach to the rear of the gateway.
Figure 7
Rear view of the VPN Router 2700
Connect the interface cables to the VPN Router 2700 in this order:
1
Connect the 10/100BASE-TX RJ-45 cable to the built-in 10/100BASE-TX
Ethernet LAN port on the gateway (
Ethernet LAN port on the gateway (
2
If you plan to connect a terminal or PC to the gateway, connect the serial cable
shipped with the VPN Router 2700 to the serial port (
shipped with the VPN Router 2700 to the serial port (
3
Connect all other cables to the ports on the installed interface cards.
If you ordered optional interface cards, connect the cables for these interfaces
to the ports.
to the ports.
CS260002A
100-2240VAC
2-1A
50-60Hz
Power
Reset
Serial
LAN
1
2
3
4