Nortel Networks 1005r User Manual
June 2007
Replacing basic chassis components
1005r Server Maintenance and Diagnostics
121
Requirements
Phillips (cross head) screwdriver, #1 and #2 bit
replacement dual NIC card
electrostatic discharge (ESD) grounding strap
To replace a dual NIC card
1
Power down the server, unplug all peripheral devices and Ethernet
cables, and disconnect the AC power. Ensure all cables are labeled.
cables, and disconnect the AC power. Ensure all cables are labeled.
2
Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
known grounded connection.
3
Remove the chassis cover. Refer to “Removing and replacing the
server cover” on page 108 for instructions.
server cover” on page 108 for instructions.
4
Disconnect the red power cable from the PCI riser assembly.
5
Disconnect the DS30X cable from the MPB96 card in the full-size
side of the PCI riser.
side of the PCI riser.