3com SuperStack 3 NBX User Manual

Using the NBX NetSet utility, you can configure several VPIM control 
parameters, check the status of the VPIM queues, and obtain statistics on 
recent VPIM activity.

To set the VPIM control parameters:

1 In the NBX NetSet - Main Menu window, click NBX Messaging.

2 Click the VPIM tab. 

 describes the fields.

To manage outgoing voice mail messages, click Queue Management. The 
Operations Management dialog box appears. See 

Table 15   VPIM Tab Fields

Max message size

Controls the size of incoming messages from other 
sites. If a message is larger than the specified 
value, the NBX system rejects it. The default value 
represents a voice mail message approximately 4 
to 5 minutes in length.

Default: 3000 Kbytes

For outgoing messages, the NBX system may not 
be able to contact the target system on the first 
attempt. If so, the NBX system attempts to contact 
the target system later. To change the time 
between attempts, change this number.

Default: 15 minutes

Minimum: 1 minute

Maximum: 60 minutes

Max number of send attempts

Specifies the number of times (Default: 4) that the 
NBX system tries to connect to the target system.

After the specified number of send attempts, the 
message is returned to the sender’s voice mailbox 
with a notice that the message could not be sent.

Table 16   Operations Management Dialog Box Fields

Operations status

The status of the queue of outgoing voice mail messages.

Possible values: Starting, Ready, Processing, Stopped.