Siemens SX541 WLAN dsl User Manual
104
Configuring the Advanced Settings
Gigaset SX541 WLAN dsl / englisch / A31008-M1025-L101-1-7619 / configure_router.fm / 21.07.2005
Sc
hablone 2005_05_02
The SSID is shown in the SSID field if there is a connection with the repeater.
The radio channel used for data transfer is shown in the Channel field.
The Signal strength shows the strength of the connection to the repeater in percent-
age terms if there is a connection to the repeater.
The radio channel used for data transfer is shown in the Channel field.
The Signal strength shows the strength of the connection to the repeater in percent-
age terms if there is a connection to the repeater.
ì
Click Refresh to update the display.
ì
Click Add to add the data of another repeater.
ì
Apply the settings by clicking OK.
Setting up Internet telephony (VoIP)
Your Gigaset SX541 WLAN dsl enables you to make telephone calls via the Internet using
an analogue phone connected to the Gigaset SX541 WLAN dsl. To do this, you require
access authorisation from your service provider and the relevant access data. You must
enter this data and other configuration settings for making calls in the VoIP (Voice over
IP) menu in the Advanced Setup.
The menu comprises the following entries:
an analogue phone connected to the Gigaset SX541 WLAN dsl. To do this, you require
access authorisation from your service provider and the relevant access data. You must
enter this data and other configuration settings for making calls in the VoIP (Voice over
IP) menu in the Advanced Setup.
The menu comprises the following entries:
u
VoIP settings: Enter the basic data from your service provider here (see page 105).
u
Extensions: Set functions here for two extensions(see page 107).
u
Dialing rules: Specify numbers here that are to be called only via the fixed network
or only via the Internet. You can block numbers completely (for example 0190 num-
bers) or enter a call-by-call provider for the fixed network (see page 108).
or only via the Internet. You can block numbers completely (for example 0190 num-
bers) or enter a call-by-call provider for the fixed network (see page 108).
u
Quick dial: Specify quick dial numbers or terms here for phone numbers you use fre-
quently (see page 110).
quently (see page 110).
Important information:
u
If VoIP is not set, you will always make calls via the fixed network and the dialing
rules (see page 108) will not apply.
rules (see page 108) will not apply.
u
All calls from the fixed network are forwarded to the phone connected to the Phone
1 socket.
1 socket.
u
If VoIP is set, then – depending on your provider – a call-by-call number is preset for
fixed network calls.
fixed network calls.
u
Please check these dialing rules (see page 108) and amend them if you have agreed
special phone tariffs with another provider.
special phone tariffs with another provider.
Please remember:
If you do not specify any of your own dialing rules, then the default settings will
be used as entered on the Dialing Plans screen in the VoIP menu. All other calls
are made via the Internet. If you press the * key twice before dialing the number
on the phone, then the call will always be made via the fixed network. The dialing
rules will not apply in this case.
Switching over takes a little time. For automatic dialing, insert a pause after the **
by pressing the recall key. You should therefore press: * key, * key, recall key and
then the keys for the required phone number.
If you do not specify any of your own dialing rules, then the default settings will
be used as entered on the Dialing Plans screen in the VoIP menu. All other calls
are made via the Internet. If you press the * key twice before dialing the number
on the phone, then the call will always be made via the fixed network. The dialing
rules will not apply in this case.
Switching over takes a little time. For automatic dialing, insert a pause after the **
by pressing the recall key. You should therefore press: * key, * key, recall key and
then the keys for the required phone number.