Siemens S223 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         271 

A switch, which is supposed to manage the other switches in stacking is named as Mas-
ter switch and the other switches managed by Master switch are named as Slave switch. 
Regardless of installed place or connection state, Master switch can check and manage 
all Slave switches. 

The below steps are provided to configure stacking. 

 

You should configure all the switches configured with stacking function to be in the same 
VLAN. To configure the switches as a switch group belongs in the same VLAN, use the 
following command. 

 NAME 

Global 

Configures device name or VID 

 

For managing the stacking function, the port connecting Master switch and Slave switch 
must be in the same VLAN. 

 

Designate Mater switch using the following command. 

Global 

Designates Master switch 

 

After designating Master switch, register Slave switch for Master switch. To register Slave 
switch or delete the registered Slave switch, use the following command. 

stack add MACADDR

 

[DE-

] 

Registers slave switch. 
MACADDR: MAC address 

stack del MACADDR 

Global 

Deletes slave switch. 

 

To make stacking operate well, it is required to enable the interface of Slave switch. The 
switches in different VLANs can not be added to the same switch group. 
 

You should designate Slave switch registered in Master Switch as Slave Switch. To des-
ignate Slave switch, use the following command. 

Global 

Designates as a slave switch