Siemens S223 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
48 A50010-Y3-C150-2-7619
4.1.7 Auto
Log-out
For security reasons of the hiD 6615 S223/S323, if no command is entered within the
configured inactivity time, the user is automatically logged out of the system. Administra-
tor can configure the inactivity timer.
configured inactivity time, the user is automatically logged out of the system. Administra-
tor can configure the inactivity timer.
To enable auto-logout function, use the following command.
Command Mode
Description
exec-timeout
<1-35791> [<0-59>]
Enables auto log-out.
1-35791: time unit in minutes (by default 10 minutes)
0-59: time unit in seconds
1-35791: time unit in minutes (by default 10 minutes)
0-59: time unit in seconds
exec-timeout 0
Global
Disables auto log-out.
To display a configuration of auto-logout function, use the following command.
Command Mode
Description
show exec-timeout
Enable
Global
Shows a configuration of auto-logout function.
The following is an example of configuring auto-logout function as 60 seconds and view-
ing the configuration.
ing the configuration.
SWITCH(config)# exec-timeout 60
SWITCH(config)# show exec-timeout
Log-out time : 60 seconds
SWITCH(config)#
4.1.8 System
Rebooting
4.1.8.1
Manual System Rebooting
When installing or maintaining the system, some tasks require rebooting the system by
various reasons. Then you can reboot the system with a selected system OS.
various reasons. Then you can reboot the system with a selected system OS.
To restart the system manually, use the following command.
Command Mode
Description
reload
[os1 | os2]
Enable
Restarts the system.
If you reboot the system without saving new configuration, new configuration will be de-
leted. So, you have to save the configuration before rebooting. Not to make that mistake,
hiD 6615 S223/S323 is supported to print the following message to ask if user really
wants to reboot and save configuration.
leted. So, you have to save the configuration before rebooting. Not to make that mistake,
hiD 6615 S223/S323 is supported to print the following message to ask if user really
wants to reboot and save configuration.
If you want to continue to reboot, press <y> key, if you want to save new configuration,
press <n> key.
press <n> key.
SWITCH# reload
Do you want to save the system configuration? [y/n]]