Siemens S223 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

50                                                                         A50010-Y3-C150-2-7619 

To set the system authentication method, use the following command. 

  {local | remote} {radius | 

 | host | all} enable 

Set the system authentication method. 
local: authentication for console access 
remote: authentication for telnet access 
radius: selects RADIUS authentication. 
tacacs: selects TACACS+ authentication. 
host: selects nominal system authentication (default). 
all: selects all the authentication methods. 

  {local | remote} {radius | 

 | host | all} disable 

Global 

Disables a configured system authentication method. 

 

If more than 2 interfaces are specified to the hiD 6615 S223/S323, you can designate one 
specific interface to access RADIUS or TACACS server. 

To designate an authentication interface, use the following command. 

  {radius | tacacs}  interface 

 [A.B.C.D] 

Global 

Designates an authentication interface. 
radius: selects RADIUS authentication. 
tacacs: selects TACACS+ authentication. 
INTERFACE: interface name 
A.B.C.D: IP address (optional) 

 

You can set the order of the authentication method with giving the priority to each authen-
tication method. To set the primary authentication method, use the following command 

  {local | remote} {radius | 

 | host} primary 

Global 

Set the primary authentication method. 
local: authentication for console access 
remote: authentication for telnet access 
radius: selects RADIUS authentication. 
tacacs: selects TACACS+ authentication. 
host: selects nominal system authentication (default).