Siemens SX763 User Manual

Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / telefone.fm / 08.12.2006

Sc

hablone 2

005_0

5_02

The functions described in this section, which are available to you when making calls via 
your Gigaset SX763 WLAN dsl, apply both for external calls and for internal calls. The 
functions described below are dependent on the connected terminal in the case of VoIP 
extensions.

Cancel calling line 
identification restric-
tion as default

You have opted to suppress the display 
of your number by default (see 
above): Dial #51# to cancel this 
default.

Calling line identifi-
cation restriction as 
default (at 
exchange)

Dial *#*51# to prevent your number 
being displayed to the other party per-
manently. In contrast to the above set-
ting, this setting is forwarded to the 
exchange and is activated there.

Cancel calling line 
identification restric-
tion default (at 
exchange)

You have opted to suppress the display 
of your number by default (see above, 
at exchange): Dial *##51# to cancel 
this default setting at the exchange. 

Please remember:
When using the signal button R, always wait until you hear a dialling tone before you 
enter the phone number for a consultation call.

Consultation

Press R to initiate a consultation with 
another phone number during a call.
Dial the desired (internal or external) 
number for the consultation.

Accept call waiting/
toggle between two 
calls

Press R2 to accept an incoming call 
during a call. The connection to the 
first call is put on hold.
If you terminate the first call before-
hand, your phone rings and you can 
take the second call as usual.
By pressing R2 again, you can toggle 
to the waiting caller.