Siemens SX763 User Manual
98
Configuring Advanced Settings
Gigaset SX763 WLAN dsl / en / A31008-M707-R131-2-7619 / configure_router.fm / 08.12.2006
Sc
hablone 2
005_0
5_02
Print Server
Your device's integrated print server allows you to offer a USB printer to all users in the
local network.
local network.
If you wish to use this function, you must first connect a USB printer to your device's USB
port. The device must be shown on the screen. You can check the status of the connec-
tion to the USB printer in the Advanced Settings – USB menu.
port. The device must be shown on the screen. You can check the status of the connec-
tion to the USB printer in the Advanced Settings – USB menu.
ì
Activate your device's integrated print server.
Users can set up the connected printer by entering the current IP address of the Gigaset
SX763 WLAN dsl on the PC.
SX763 WLAN dsl on the PC.
ì
Click OK to apply the changes.
You will find information on setting up a printer connected to the Gigaset SX763 WLAN
dsl in Section "Installing the printer port for network printers" on page 118.
dsl in Section "Installing the printer port for network printers" on page 118.
Notes:
u
The Windows XP or Windows 2000 operating system is a prerequisite for using the
print server.
print server.
u
Not all functions may be supported by the print server in the case of special print-
ers, especially multifunction devices (combination of printer, scanner or fax). You
can obtain additional information by contacting the hotline or else on the Internet
(see Quick Start Guide).
ers, especially multifunction devices (combination of printer, scanner or fax). You
can obtain additional information by contacting the hotline or else on the Internet
(see Quick Start Guide).