Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

132                                                                         A50010-Y3-C150-2-7619 

To configure interval of sample inquiry for RMON alarm, use the following command. 

 <0-65535> 

RMON 

Configures interval of sample inquiry. 
(unit: second) 

 

After finishing all configurations, you need to activate RMON alarm. To activate RMON 
alarm, use the following command. 

RMON 

Activates RMON alarm. 

 

When you need to change a configuration of RMON alarm, you should delete an existing 
RMON alarm. 

To delete RMON alarm, use the following command. 

 <1-65535> 

Global 

Deletes RMON history of specified number, enter the 
value for deleting. 

 

To display RMON alarm, use the following command. 

 

 

 

All 

Shows a configured RMON alarm. 

 

RMON event identifies all operations such as RMON alarm in the switch. You can config-
ure event or trap message to be sent to SNMP management server when sending RMON 
alarm. 

You need to open RMON Event Configuration mode to configure RMON event.   

 <1-65535> 

Global 

Opens RMON Event Configuration mode. 
1-65535: index number 

 

When RMON event is happened, you need to input community to transmit SNMP trap 
message to host. Community means a password to give message transmission right.