Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

234                                                                         A50010-Y3-C150-2-7619 

Also, to make Preempt “enable” as default setting, use the following command on VRRP 
configuration mode. 

VRRP 

Deletes the former configuration of Preempt to enable 
it. 

 

To display the VRRP statistics that packets have been sent and received, use the follow-
ing command. 

Enable 

Global 
Bridge 

VRRP 

Shows statistics of packets in Virtual Router Group. 

 

The following is an example of viewing statistics of packets in Virtual Router Group. 

SWITCH(config)# show vrrp stat 

 VRRP statistics : 

  VRRP  packets  rcvd  with  invalid  TTL        0 

  VRRP  packets  rcvd  with  invalid  version    0 

  VRRP  packets  rcvd  with  invalid  VRID       0 

  VRRP  packets  rcvd  with  invalid  size       0 

  VRRP packets rcvd with invalid checksum   0 

  VRRP packets rcvd with invalid auth-type  0 

  VRRP packets rcvd with interval mismatch  0 

SWITCH(config)# 

 

To clear the VRRP statistics information, use the following command. 

Enable 

Global 
Bridge 

VRRP 

Clears statistics of packets in Virtual Router Group. 

 

User can customize port bandwidth according to user’s environment. By this configuration, 
you can prevent a certain port to monopolize whole bandwidth so that all ports can use 
bandwidth equally. Egress and ingress can be configured both to be same and to be dif-
ferent. 

The hiD 6615 S223/S323 can apply the rate limit and support ingress policing and egress 
shaping.