Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         237 

The following is an example of showing the configuration after limiting the number of 
packets transmitted to the port number 1 as 10,000. 

SWITCH(bridge)# mac-flood-guard 1 10000 

SWITCH(bridge)# show mac-flood-guard 

--------------------------------- 

 Port Rate(fps) | Port Rate(fps) 

----------------+---------------- 

   1    10000     |   2  Unlimited 

   3  Unlimited  |   4  Unlimited 

   5  Unlimited  |   6  Unlimited 

   7  Unlimited  |   8  Unlimited 

   9  Unlimited  |  10  Unlimited 

  11  Unlimited  |  12  Unlimited 

  13  Unlimited  |  14  Unlimited 

  15  Unlimited  |  16  Unlimited 

(Omitted) 

SWITCH(bridge)# 

 

Routing protocol uses bandwidth information to measure routing distance value. To con-
figure bandwidth of interface, use the following command. 

 BANDWIDTH Interface 

Configures bandwidth of interface, enter the value of 
bandwidth. 

 

The bandwidth can be from 1 to 10,000,000 Kbits. This bandwidth is for routing informa-
tion implement and it does not concern physical bandwidth. 

To delete a configured bandwidth, use the following command. 

 BANDWIDTH Interface 

Deletes configured bandwidth of interface, enter the 
value. 

 

The following is an example of configuration to bandwidth as 1000. 

SWITCH(config-if)# bandwidth 1000 

SWITCH(config-if)# show running-config interface 1 

! 

interface default 

 bandwidth  1m 

 ip address 10.27.41.181/24 

! 

SWITCH(config-if)#