Manualsbrain.com
  1. Manuals
  2. Brands
  3. Siemens
  4. S323
  5. User Manual

Siemens S323 User Manual

Download
Page of 381
User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 
A50010-Y3-C150-2-7619                                                                         305 
9.3.1.1 
PIM-SM and Passive Mode 
You need to open Interface Configuration mode of specified interface for activating PIM-
SM on Ethernet interface. To open Interface Configuration mode, use the following com-
mand. 
Command Mode 
Description 
interface
 INTERFACE Global 
Opens Interface Configuration mode of specified inter-
face. 
 
To disable Interface Configuration mode, use the following command. 
Command Mode 
Description 
no interface
 INTERFACE 
Global 
Disables a specified interface. 
 
To activate PIM-SM after opening the Interface Configuration mode, use the following 
command. 
Command Mode 
Description 
ip pim sparse-mode
 [passive] 
Interface 
Activates PIM-SM on specified interface. 
 
The ip pim sparse-mode passive command enables passive mode operation for local 
members on the interfaces. Passive mode essentially stops PIM transactions on the inter-
face, allowing only IGMP mechanism to be active. To turn off passive mode, use the ip 
pim sparse-mode passive
 or the ip pim sparse-mode command. 
To disable PIM-SM, use the following command. 
Command Mode 
Description 
no ip pim sparse-mode
 [passive]
Interface Disables 
PIM-SM 
from specified interface. 
 
9.3.1.2 DR 
Priority 
To set the priority for which a router is elected as the designated router (DR), use the fol-
lowing command in interface configuration mode. 
Command Mode 
Description 
ip pim dr-priority 
<
0-4294967294> 
Configures the priority for router. 
0-4294967294: priority value 
no ip pim dr-priority 
Interface 
Returns to the default value 1. 
 
The router with the highest priority value configured on an interface will be elected as the 
DR. If this priority value is the same on multiple routers, then the router with the highest 
IP address configured on an interface will be elected as the DR. If a router does not ad-
vertise a priority value in its hello messages, the router is regarded as having the highest 
priority and will be elected as the DR. If there are multiple routers with this priority status, 
then the router with the highest IP address configured on an interface will be elected as