Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         309 

decide which IP address to be used as candidate-RP. This command is used to statically 
configure the RP address for multicast groups. 

To configure IP address to be used in candidate-RP, use the following command. 

ip pim rp-address  A.B.C.D

 [<1-

99> | <1300-1999>] [override] 

Global 

Configures RP address for multicast groups statically. 
A.B.C.D: IP address 
1-99: IP standard access list 
1300-1999: IP standard access list (expanded range) 
override: override dynamically RP mappings 

 

•

  If RP-address configured through BSR and RP-address configured statically are both 

 

available for a group range, the RP-address configured through BSR is chosen. 

•

  If multiple static-RPs are available for a group range, then one with the highest IP 

 address 

is 

chosen. 

 

To delete configured IP address, use the following command. 

no ip pim rp-address A.B.C.D

 

Global 

Deletes configured IP address. 

 

Use this command to give the router the candidate RP status using the IP address of the 
specified interface. 

ip pim rp-candidate INTERFACE 

[group-list <1-99>] [interval <1-
16383>] [priority <0-255>] 

Global 

Configures a message for a candidate RP. 
INTERFACE: interface name 
1-99: IP standard access list 
1-16383: advertisement interval (unit: second) 
0-255: priority value 

 

To delete configured priority of candidate-RP, use the following command. 

Unconfigures the entire setting of candidate-RP. 

 

 

 

 <1-99> 

Global 

Deletes the setting of candidate-RP of specific inter-
face.