Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

324                                                                         A50010-Y3-C150-2-7619 

•

 

 

 

It’s the waiting time for the restarting of Neighboring router’s BGP process. Restart 

 

time allows BGP process time to restart and implement the internal connection (The 

 

session). However, if it’s not working properly, it is considered as the router stops op-

 erating. 

•

 

 

 

After BGP process of Neighboring router is restarted, it holds the time until BGP up

 

dates the path information. In case that the information of BGP routes is not updated 

 

until the stalepath time, the switch discards this BGP routes information. 

To set restart time or stalepath time on Graceful Restarting algorithm, use the following 
command. 

<1-3600> 

Sets the restart time of Graceful Restart configuration 
in the unit of second. 
1-3600: restart time (default: 120) 

 <1-3600> 

Router 

Sets the stalepath-time of Graceful Restart configura-
tion in the unit of second. 
1-3600: stalepath time (default: 30) 

 

If you don’t use Graceful Restart feature or want to return the default value for restart time 
or stalepath time, use the following command. 

 [<1-3600>] 

Restores the default value for restart time. 

 [<1-3600>] 

Router 

Restores the default value for stalepath time. 

 

The hiD 6615 S323 recently supports both unicast and multicast as address-family. Use 
the following command in choosing either unicast or multicast to enter the Address-
Family Configuratio

n mode allowing configuration of address-family specific parameters. 

Use the following command in order to enable address family routing process, which 
open you in Address-Family Configuration mode. 

[multicast  | 

] 

Router 

Opens the Address-Family Configuration mode to con-
figure sessions for IP v4 prefixes. 

Address-

Family 

Exits to Router Configuration mode.