Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

326                                                                         A50010-Y3-C150-2-7619 

To create a BGP Peer Group, use the following command.   

 NAME peer-group 

Create a BGP peer group. 
NAME: peer group name 

 NAME peer-group 

Router 

Delete the BGP peer group created before. 

 

To specify neighbor to the created peer group, use the following command.   

  NEIGHBOR-IP  peer-

 NAME 

Includes BGP neighbor to specified peer group using 
IP address. 
NEIGHBOR-IP: neighbor IP address 
NAME: peer group name 

 NEIGHBOR-IP peer-

 NAME 

Router 

Removes BGP neighbor from the specified Peer 
Group. 

 

You can apply the specific route map on neighboring router that the exchange route in-
formation between routers or blocking the IP address range is configured on route map. 

To make BGP Neighbor router exchange the routing information using Route-map, use 
the following command. 

 {NEIGHBOR-IP | 

}  route-map  NAME  {in | 

}  

Applies a route map to incoming or outgoing routes on 
neighboring router or peer group and exchange the 
route information. 
NEIGHBOR-IP: neighbor IP address 
GROUP: peer group name 
NAME: route map name 

  {NEIGHBOR-IP  | 

}  route-map  NAME  {in | 

} 

Router 

Removes the connection with configured route-map. 

 

The hiD 6615 S323 supports the feature to force to shutdown any active session for the 
specified BGP router or peer group and to delete the routing data between them. It shut-
downs all connections and deletes the received path information from neighboring router 
or peer group.