Siemens S323 User Manual
UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
330 A50010-Y3-C150-2-7619
See Section 10.1.5.1 when you configure the detail parameters.
To reset the sessions of BGP router connected to external AS and initialize the details of
route configurations, use the following command.
route configurations, use the following command.
Command Mode
Description
clear ip bgp external
in [prefix-
filter
]
clear ip bgp external ipv4
{uni-
cast
| multicast} in [prefix-filter]
Resets the session of BGP router connected to exter-
nal AS.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
external: clears all external peers.
nal AS.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
external: clears all external peers.
clear ip bgp external out
clear ip bgp external
ipv4 {uni-
cast
| multicast} out
Resets the session of BGP router connected to exter-
nal AS.
external: clears all external peers.
out: clears outgoing advertised routes.
unicast | multicast : address family modifier
nal AS.
external: clears all external peers.
out: clears outgoing advertised routes.
unicast | multicast : address family modifier
clear ip bgp external soft
[in |
out
]
clear ip bgp external
ipv4 {uni-
cast
| multicast} soft [in | out]
Global
Updates the route information only while the session is
possible of BGP router connected to external AS. Apply
the route either incoming or outgoing routes.
external: clears all external peers.
possible of BGP router connected to external AS. Apply
the route either incoming or outgoing routes.
external: clears all external peers.
10.1.5.5
Session Reset of Peer Group
To reset the session for all members of a peer group, use the following command.
Command Mode
Description
clear ip bgp peer-group
GROUP
Global
To reset the session for all configured routers of speci-
fied peer group.
GROUP: peer group name
fied peer group.
GROUP: peer group name
See Section 10.1.5.1 when you configure the detail parameters.
To reset the sessions of BGP routers which are members of specified peer group and ini-
tialize the details of route configurations, use the following command.
tialize the details of route configurations, use the following command.
Command Mode
Description
clear ip bgp peer-group
GROUP
in
[prefix-filter]
clear ip bgp peer-group
GROUP
ipv4
{unicast | multicast} in [pre-
fix-filter
]
Global
Resets the session for all members of specified peer
group.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
GROUP: peer group name
group.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
GROUP: peer group name
i
i