Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         327 

To disable the exchange information with a specified router or peer group, use the follow-
ing command. 

 {NEIGHBOR-IP | 

} shutdown 

Shutdowns any active session for the specified router 

or peer group and delete all related routing data. 
NEIGHBOR-IP: neighbor IP address 
WORD: peer group name or neighbor tag 

  {NEIGHBOR-IP-

| WORD} shutdown 

Router 

Enables the sessions with a previously existing 

neighbor or peer group that had been disabled. 

 

When you manage BGP network, you can use the command to reset the session for all 
peers occasionally. Because the internal connections are re-established newly after reset-
ting, the route information of the connected routers is restored by default. 

You can reset the session in specified condition. The hiD 6615 S323 is available with 
several parameters to reset the BGP connections. 

The advanced configurations describe in the following sections, are as follows: 

•

 

•

 

•

 

•

 

•

 

 

To reset the sessions with all BGP peers, use the following command.     

 

Global 

Resets all sessions with BGP peer groups. 

 

When the route parameters restore to the default value by reset command, you can con-
figure the specific parameters for its initialization. If you would like to reset/clear the out-
going advertised routes only, you should use out parameter. Otherwise, if you’d like to re-
set/clear the incoming advertised routes only, you should use in parameter. 

Meanwhile, if prefix-filter  is configured with in  option, ORF (Outbound Route Filtering) 
and incoming route can be reset. ipv4 option makes BGP peers have narrowed down to 
IP address family peers. By using soft option, you can configure the switch to update 
route information only when the session is still connected.