Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

48                                                                         A50010-Y3-C150-2-7619 

For security reasons of the hiD 6615 S223/S323, if no command is entered within the 
configured inactivity time, the user is automatically logged out of the system. Administra-
tor can configure the inactivity timer. 

To enable auto-logout function, use the following command. 

 <1-35791> [<0-59>]

Enables auto log-out. 
1-35791: time unit in minutes (by default 10 minutes) 
0-59: time unit in seconds 

Global 

Disables auto log-out. 

 

To display a configuration of auto-logout function, use the following command. 

Enable 

Global 

Shows a configuration of auto-logout function. 

 

The following is an example of configuring auto-logout function as 60 seconds and view-
ing the configuration. 

SWITCH(config)# exec-timeout 60 

SWITCH(config)# show exec-timeout 

Log-out time : 60 seconds 

SWITCH(config)# 

 

When installing or maintaining the system, some tasks require rebooting the system by 
various reasons. Then you can reboot the system with a selected system OS. 

To restart the system manually, use the following command. 

 [os1 | os2] 

Enable 

Restarts the system. 

 

If you reboot the system without saving new configuration, new configuration will be de-
leted. So, you have to save the configuration before rebooting. Not to make that mistake, 
hiD 6615 S223/S323 is supported to print the following message to ask if user really 
wants to reboot and save configuration. 

If you want to continue to reboot, press <y> key, if you want to save new configuration, 
press <n> key. 

SWITCH# reload 

Do you want to save the system configuration? [y/n]]