Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         49 

The hiD 6615 S223/S323 reboots the system according to user’s configuration. There are 
two basises for system rebooting. These are CPU and memory. CPU is rebooted in case 
CPU Load or Interrupt Load continues for the configured time. Memory is automatically 
rebooted in case memory low occurs as the configured times. 

To enable auto system rebooting function, use the following command. 

 <50-100> <1-100> 

 

Configure to reboot the system automatically in case 
an average of CPU or interrupt load exceeds the con-
figured value during the user-defined time. 
50-100: average of CPU load per 1 minute 
1-100: average of interrupt load 
TIME: minute 

 <1-120> <1-

10> 

Configure to reboot the system automatically in case 
memory low occurs as the configured value. 
1-120: time of memory low 
1-10: count of memory low(The default is 5) 

 {cpu | memory} 

Bridge 

Disables auto system rebooting. 

 

To show auto system rebooting configuration, use the following command. 

{cpu | memory}

Global/ 

Bridge 

Shows a configuration of auto-rebooting function. 

 

The following is an example of configuring auto-restarting function in case CPU load or 
Interrupt load maintains over 70% during 60 seconds and viewing the configuration. 

SWITCH(config)# SWITCH(bridge)# auto-reset cpu 70 70 1 

SWITCH(bridge)# show auto-reset cpu 

------------------------------ 

 Auto-Reset  Configuration(CPU) 

------------------------------ 

auto-reset:           on 

cpu  load:              70 

interrupt  load:       70 

continuation  time:    1 

SWITCH(bridge)# 

 

For the enhanced system security, the hiD 6615 S223/S323 provides two authentication 
methods to access the switch using Remote Authentication Dial-In User Service (RA-
DIUS) and Terminal Access Controller Access Control System Plus (TACACS+).