Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

52                                                                         A50010-Y3-C150-2-7619 

If there is no response from RADIUS server, the hiD 6615 S223/S323 is supposed to re-
transmit an authentication request. To set the frequency of retransmitting an authentica-
tion request, use the following command. 

 <1-10> 

Global 

Sets the frequency of retransmit. 
1-10: Enters the times of retry (default: 3) 

 

 

To add/delete the TACACS server for system authentication, use the following command. 

 tacacs server A.B.C.D KEY

Adds the TACACS server with its information. 
A.B.C.D: IP address 
KEY: authentication key value 

 tacacs server A.B.C.D 

Global 

Deletes an added TACACS server. 
A.B.C.D: IP address 

 

You can add up to 5 TACACS servers. 
 

After adding the TACACS server, you should register interface of TACACS server con-
nected to user’s switch. Use the following command. 

  NAME

 

Registers interface of TACACS server connected to
user’s switch. 

Global 

Clears TACACS server interface 

 

To specify the priority of a registered TACACS server, use the following command. 

 

<1-5> 

Global 

Specifies the priority of RADIUS server. 
A.B.C.D: TACACS server address 
1-5: the priority of TACACS server 

 

After the authentication request, the hiD 6615 S223/S323 waits for the response from the 
TACACS server for specified time.