Siemens S323 User Manual

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         53 

To specify a timeout value, use the following command. 

 tacacs timeout <1-100> 

Global 

Specifies a timeout value. 
1-100: waiting-time for the response (default: 3) 

 

The hiD 6615 S223/S323 provides several additional options to configure the system au-
thentication via TACACS server. 
 

To specify TCP port for the system authentication, use the following command. 

 tacacs socket-port 

<1-65535> 

Specifies TCP port for the authentication. 
1-65535: TCP port 

 tacacs socket-port 

Global 

Deleted the configured TCP port for the authentication 

To select the authentication type for TACACS+, use the following command. 

  tacacs  auth-type  {ascii | 

 | chap} 

Selects the authentication type for TACACS+. 
ascii: plain text 
pap: password authentication protocol 
chap: challenge handshake authentication protocol 

 tacacs auth-type 

Global 

Deletes a specified authentication type. 

 

You can define a priority level of user. According to the defined priority level, the user has 
different authorization to access the DSLAM. This priority must define in the TACACS 
server in the same way. 

To define the priority level of user, use the following command. 

  tacacs  priority-level  {min | 

 | max | root} 

Defines the priority level of user, refer the below infor-
mation for the order of priority. 

 tacacs priority-level 

Global 

Deletes a defined priority level. 

 

The order of priority is root = max > user > min.