Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

92                                                                         A50010-Y3-C150-2-7619 

The following is an example to display a configuration of syslog. 

SWITCH# show running-config syslog 

! 

syslog start 

syslog output info local volatile 

syslog output info local non-volatile 

! 

SWITCH# 

If you change a configuration of the system, you need to save the changes in the system 
flash memory. To save all changes of the system, use the following command. 

All 

Saves all changes in the system flash memory. 

 

When you use the command, write memory, make sure there is no key input until [OK] 
message appears. 

 

In hiD 6615 S223/S323, it is possible to save the configuration automatically. To configure 
the con-figuration periodically, use the following command. 

 <10-1440> 

Saves auto-configuration periodically. 
10-1440: auto-saving interval (Default: 10 minute) 

Global 

Disables auto-saving function. 

 

To manage a system configuration file, use the following command. 

{FILENAME 

| startup-config} 

Copies a running configuration file. 
FILENAME: configuration file name 
startup-config: startup configuration file 

 FILENAME 

Copies a startup configuration file. 
FILENAME: configuration file name. 

 FILENAME startup-config 

Copies a specified configuration file to the startup con-
figuration file. 
FILENAME: configuration file name 

 FILENAME1 FILENAME2 

Copies a specified configuration file to another configu-
ration file. 

erase FILENAME

 

Enable 

Deletes a specified configuration file. 
FILENAME: configuration file name