Siemens S323 User Manual

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

90                                                                         A50010-Y3-C150-2-7619 

To set a threshold of system temperature, use the following command. 

 VALUE VALUE 

Sets a threshold of system temperature in the unit of 
centigrade (°C). 
VALUE: Threshold temperature between -40 ~ 100  

Global 

Deletes a configured threshold of system temperature.

 

To show a configured threshold of system temperature, use the following command. 

Enable 

Global 

Shows a status and configured threshold of system 
temperature. 

 

To set a threshold of system memory in use, use the following command. 

 <20-100> 

Sets a threshold of system memory in the unit of per-
cent (%). 
20-100: system memory in use 

Global 

Deletes a configured threshold of system memory. 

 

FTP server is enabled on hiD 6615 S223/S323 by default. But this configuration can’t 

provide the security serveice becaue it’s easy to access to the port #23 by others. If the 
default configuration is unnecessary on sysem, user can disable the system as FTP 
server.  

To enable/disable the system of hiD S223/S323 as FTP server, use the following com-
mand. 

{enableㅣdisable} Global 

Enables/ disables the function for FTP serve 

Default: enable 

 

The follwing is an example of displaying the status of FTP server. 

SWITCH(config)# ftp server disable 

SWITCH(config)# show running-config 

(Omitted) 

! 

ftp server disable 

(Omitted) 

SWTICH(config)#