Enterasys Networks 1H582-xx User Manual
Logging and Network Management Command Set
Configuring System Logging
11-6
provides an explanation of the command output.
Matrix>show logging all (Continued from previous page)
emergencies(1) alerts(2) critical(3)
errors(4) warnings(5) notifications(6)
information(7) debugging(8)
Minimum message level displayed on the console session: warnings(5)
Facility Severity Port
-------------------------------------------------------------
Defaults: local0 emergencies(1) 514
IP Address Facility Severity Port Status
-------------------------------------------------------------------------
1 10.1.129.55 local0 notifications(6) 514 active
1 Desc:Routing
Table 11-1
show logging all Output Details
Output
What It Displays...
Global Logging
State
State
Whether logging is globally enabled or disabled.
Application
Mnemonic values for applications being logged. For details
on setting this value using the set logging application
command, refer to
on setting this value using the set logging application
command, refer to
. For a list of valid values
and their corresponding applications, refer to
.
Current Severity
Level
Level
Severity level (1 - 8) at which the server is logging messages
for the listed application. For details on setting this value
using the set logging application command, refer to
for the listed application. For details on setting this value
using the set logging application command, refer to
.
Defaults
Default facility name, severity level and UDP port
designation (as described below.) For details on setting this
value using the set logging default command, refer to
designation (as described below.) For details on setting this
value using the set logging default command, refer to
IP Address
Syslog server’s IP address. For details on setting this using
the set logging server command, refer to
the set logging server command, refer to