GarrettCom 6K32FR User Manual

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

 

 

The two Giga port has been offered as 

GBPM-2OTX (fiber or RJ-45), whereas the 

single Gigabit module comes in flavor of 

G+4(10/100 RJ-45 ports) or G+2 (100Mb 

fiber ports) as shown below in the above 

figure. 

Each port has an Activity (ACT) 

LED indicating packets being received and a 

link (LK) LED indicating proper 

connectivity with the remote device when lit.

hat 

in 

er cooling air flow, safety, 

etc. 

Four screws hold the 6KM-BLNK in place. 

ION, 

instead contact your supplier 

for assistance or contact GarrettCom Customer Support. 

5.2.13 6KM-BLNK 

 

The 6KM-BLNK is a 

blank face plate or cover plate t

must be installed in any empty 

6K32F Series PM slot to mainta

prop

 

All Magnum Ethernet products are designed to provide reliability and 

consistently high performance in all network environments.  The installation of a 

Magnum 6K32F Series Switch is a straight-forward procedure (see  INSTALLAT

Section 3.0);  the operation is also straight-forward and is discussed in Section 4. 

 

Should problems develop during installation or operation, this section is 

intended to help locate, identify and correct these types of problems.  Please follow the 

suggestions listed below prior to contacting your supplier.  However, if you are unsure of 

the procedures described in this section or if the Magnum 6K32F Series Switch is not 

performing as expected, do not attempt to repair the unit; 

 

60 

.

.