GarrettCom 6K32FR User Manual

Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08) 

 
5.2.11a  6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode 
FX , LC Small-Form-Factor 
 

The Magnum 6KP8-

45SLC eight port Module is a 

combo module with copper and 

fiber (Small Form Factor) LC 

type fiber ports. The small size 

of  LC connectors give an 

advantage of placing more ports

on one module. The 6KP8-45-

2SLC is equipped with 6 10/10

RJ-45 ports and 2 Single-mode 

fiber ports. When installed in a Magnum 6K32F Series Switch, it supports the stan

distances as mentioned on 5.2.4. and the LEDs also act similarly. 

 

0 

dard 

5
 

The Magnum GBIC-SXSC is 

a multi-mode Gigabit fiber connector 

equipped with SC type connectors and 

can be easily snapped in and out. The 

Gigabit fiber ports are most popular as 

server-to-switch and switch-to-switch 

applications. It supports cable distances 

up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 550m at full duplex. 

The GBIC transceiver has been offered in the modular slot with multiple options as per 

the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ-

45), whereas the single Gigabit module comes in options of  G+2 (100Mb fiber ports) or 

G+4(10/100 RJ-45 ports) as shown in the above figure. 

The GBIC transceiver is fastened using snap-in clips. Insert the transceiver 

(take care to insert it the right way up, arrows on top) until it clicks in place. While 

removing the transceiver, press the clips on either side of the transceiver at the same time 

and pull the transceiver out. 

Each port has an Activity (ACT) LED indicating packets being received and a 

Link (LK) LED indicating proper connectivity with the remote device when lit. 

 

58 

.

.