Huawei E960 User Manual

 

37 

3. 

ght. 

bout network mode. 

 Ethernet connection is normal. 

P 

ically, the PC 

ee "Configuring the PC Network

."

 

7.  Check whether the driver of the network adapter is correctly installed. 

 the E960 to factory 

1.  The power indicator is on, and the E960 is normally connected with the power adapter. 

If the power indicator is off, you need to check whether the power is normally 
connected. 

2.  There are five signal strength indicators on the E960 panel. The more green indicators 

are on, the stronger the signal strength. If all of the signal strength indicators are off, 
you need to check whether the area is covered by WLAN. 
If the area is covered by WLAN, you need to check whether the network mode is ri
See Chapter 9 "Configuring UMTS Settings" for information a

4.  If the 1, 2, 3, 4 four indicators on the panel blinks, the corresponding Ethernet 

interfaces are normally connected. If the indicators are off, you need to check and 
ensure that the corresponding

5.  You must configure the correct PPP user name and PPP password when you access the 

internet through the E960. Check whether they are correct, and see "Configuring PP
Profile Settings" for details. 

6.  If the DHCP service is disabled and the PC obtains the IP address dynam

also cannot access the internet. You can change the mode to manually assign an IP 
address. S

8.  If the preceding methods cannot solve the problem, you can reset

defaults. 

If there ar

1. 

e interferences or shields near the E960, you can adjust the position of the 

3. 
4.  Compare the data, the SSID on the network adapter should be ANY or be the same 

ter and E960 should 

E960. When the signal strength is strong, you can move to the next step. 

2.  Check and record the following data on the PC's network adapter: SSID, WEP type, 

and key. 
Check and record the following data on the E960: SSID, WEP type, and key. 

with that on the E960. The WEP type and key on the network adap
be identical. Otherwise, you need to change the data on the network adapter. 

If you forgot the IP address of the LAN interface, you can input 

http://e.home

 and login 

in the mode of PC obtaining IP address automatically.