Proxim AP-2000 User Manual

Getting Started

Hardware Installation

•

•

•

AP-2000 with Active Ethernet

1. Slide the AP module onto the mounting bracket. Make sure it is properly seated.

Figure 2-1

Insert Module into Mounting Bracket

2. Slide an 802.11b, 802.11b/g wireless card, or 802.11a card with antenna adapter (not included in the kit) into Slot A

or B. NOTE: The 802.11a wireless card with antenna adapter will only fit in Slot A.

3. Slide an 802.11b or an 802.11b/g wireless card (included in the kit) into Slot A or B.

Figure 2-2

Slide a PC Card into the AP

4. Connect power to the unit from a DC injector device, such as the ORiNOCO 1-Port Active Ethernet DC Injector

hub.

5. Wait for the LED indicators to turn green before proceeding.