Proxim 5012-SUR User Manual
Page 10
Copyright © 2006 Proxim Wireless
step 3: Mount unit to Pole
Mount the 5012-SUR to a pole as follows:
Using a screwdriver, turn the screw on the band clamp counter-clockwise
until the clamp opens.
until the clamp opens.
Place the back of the 5012-SUR against the pole such that the pole fits into
the curved portion of the unit.
the curved portion of the unit.
With the 5012-SUR aimed in the direction of the BSU, slide the flat end of
the band clamp around the pole and through the top opening in the 5012-
SUR unit, threading the flat end of the band clamp into the metal catch at
the other end.
the band clamp around the pole and through the top opening in the 5012-
SUR unit, threading the flat end of the band clamp into the metal catch at
the other end.
Using a 5/16” nutdriver or a screwdriver, turn the screw on the band clamp
clockwise until it is tight enough to hold the unit in place
clockwise until it is tight enough to hold the unit in place
Note:
Do not fully tighten band clamps; you must first ensure a functional link to
the BSU (see Step 4: View LEDs/Adjust Mounting).
the BSU (see Step 4: View LEDs/Adjust Mounting).
1.
2.
3.
4.