Schneider Electric 61 User Manual

9

 

• Option to reinitialize the drive without turning it off, via 

[Product reset]

 (rP)

.

• Option to reinitialize the drive via a logic input without turning it off, using 

[Product reset assig.]

 (rPA)

.

• The option to configure the "output phase loss" fault 

[Output Phase Loss] 

(OPL)

 to 

[Output cut]

 (OAC) 

has been extended to all drive 

ratings (previously limited to 45 kW (60 HP) for ATV61

ppp

M3X and 75 kW (100 HP) for ATV61

ppp

N4).

• New monitoring function based on speed measurement using "Pulse input" input, via the 

[FREQUENCY METER]

 (FqF-)

 menu.

• The braking unit short-circuit fault can now be configured using 

[Brake res. fault Mgt]

 bUb)

.

• The 

[Damper stuck] 

(Fd1) 

fault in the Damper control function can be configured via 

[DAMPER FAULT MGT.]

 

(FdL-)

.

Extension of the range with addition of the drives ATV61

ppp

Y for network 500 to 690 V.

The ranges of adjustment and factory settings of some parameters are adapted to the new voltage.

Increase in adjustment range of delay parameters for relays and logic outputs : 0 to 60000 ms instead of 0 to 9999 ms.

• New parameter 

[Conf. sensor flow]

 (LnS)

 allowing to adjust the sensor of null flow in positive or negative logic.

The communication card APOGEE FLN P1 (VW3 A3 314) is fully supported with the version V1.6 and above of the Altivar 61 software.