Quatech ABDB-ET Series User Manual

 
Page 36 

AirborneDirect™ Ethernet Bridge User's Guide 

100-8007-141G 

 

 

Wireless Security Mode 

Enables or disables wireless security: 

•  Disable   

– Disable any security (default)  

•  WEP64   

 

– 64-bit key length (11 ASCII    

    characters) 

•  WEP128 

 

– 128-bit key length (26 ASCII    

    characters) 

•  WPA-PSK     - WPA with preshared key.                   

    Requires 

preshared 

key 

• 

WPA-LEAP 

 - 

WPA with 802.1x (LEAP)    

 

    authentication. 

Requires 

LEAP 

 

    username 

and 

password

 

•  WPA-LEAP64

 - 

WPA with 802.1x (LEAP)    

 

 authentication, and using "WPA 
Migration Mode"  (static 64-bit WEP 
key is used for broadcast and 
multicast traffic)  

• 

WPA-LEAP128

 - 

WPA with 802.1x (LEAP) 

authentication, and using "WPA 
Migration Mode"  (static 128-bit WEP 
key is used for broadcast and 
multicast traffic)  

 

• 

WPA-PSK64

 - 

WPA with preshared key, and 

using "WPA Migration Mode" (static 
64-bit WEP key is used for broadcast 
and multicast traffic) Requires 
preshared key.  

 

• 

WPA-PSK128

 - 

WPA with preshared key, and 

using "WPA Migration Mode" (static 
128-bit WEP key is used for broadcast 
and multicast traffic) Requires 
preshared key.  

 

WPA Passphrase (Preshared 
Key) 

Configures the Pre-Shared Key used with WPA-PSK security.  
The input range is 8 to 63 ASCII characters or 64 hex 
characters. This key must match the key on the AP. 

LEAP Username 

Configures the WPA-LEAP username.  

The LEAP username [1 to 32 characters] must match the 
LEAP username assigned on the LEAP server. The LEAP 
username cannot contain spaces.