TP-LINK TL-R600VPN User Manual

TL-R600VPN 

  

 

25

Server and DMZ Host may change accordingly at the same time; you’d better 

re-configure it as well. 

Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on the 

screen below (shown in Figure 4-11). 

Some ISPs require that you register the MAC address of your adapter, which is connected to your 
cable, DSL modem or Ethernet during installation. You do not generally need to change anything 
here. 

 

 

Figure 4-11 

¾

  WAN MAC Address - This field displays the current MAC address of the WAN port, which is 

used for the WAN port. If your ISP requires that you register the MAC address, please enter 

the correct MAC address into this field. The format for the MAC address is 

XX-XX-XX-XX-XX-XX (for example: 00-0A-EB- E6-B9-49). 

¾

  Your PC's MAC Address - This field displays the MAC address of the PC that is managing 

the router. If the MAC address is required, you can click the Clone MAC Address button 

and this MAC address will fill in the “WAN MAC Address” field. 

)

1) Click 

Restore Factory MAC to restore the MAC address of WAN port to the factory 

default value. 

2)  Only the PC(s) on your LAN can use the MAC Address Clone feature. 

3)  After you finish the configuration, click the Save button, and the router will prompt you to 

reboot.