TP-LINK TL-WR642G User Manual

 

 

50

 

Using Advanced Security page (shown in Figure 4-39), you can protect the router from being 

attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN. 

 

Figure 4-39    Advanced Security settings 

¾

  Packets Statistic interval (5 ~ 60) - The default value is 10. Select a value between 5 and 

60 seconds in the pull-down list. The Packets Statistic interval value indicates the time 

section of the packets statistic. The result of the statistic used for analysis by SYN Flood, 

 and ICMP-Flood. 

¾

  DoS protection - Enable or Disable the DoS protection function. Only when it is enabled, 

will the flood filters be effective. 

¾

  Enable ICMP-FLOOD Attack Filtering -  Enable or Disable the ICMP-FLOOD Attack 

Filtering. 

¾

  ICMP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value 

between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets numbers is beyond the 

set value, the router will start up the blocking function immediately. 

¾

  Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.   

¾

  UDP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value