TP-LINK AC750 User Manual

 

- 98 - 

There are two submenus under the Advanced Routing menu as shown in Figure 4-87:  Static 

Route List and System Routing Table. Click any of them, and you will be able to configure the 

corresponding function. 

Choose menu “Advanced Routing  →  Static Route List”, and then you can configure the static 

route in the next screen (shown in Figure 4-88). A static route is a pre-determined path that 

network information must travel to reach a specific host or network. 

 

Figure 4-88 Static Route 

1. Click 

Add New shown in Figure 4-88, you will see the following screen. 

 

Figure 4-89 Add or Modify a Static Route Entry 

2.  Enter the following data: 



 

Destination IP Address - The Destination IP Address is the address of the network or 

host that you want to assign to a static route. 



 

Subnet Mask  - The Subnet Mask determines which portion of an IP Address is the 

network portion, and which portion is the host portion. 



 

Gateway - This is the IP Address of the gateway device that allows for contact between 

the router and the network or host.