TP-LINK AC750 User Manual

 

- 23 - 

 

Figure 4-2 the Network menu 

There are three submenus under the Network menu (shown in Figure 4-2): WAN, LAN and MAC 

Clone. Click any of them, and you will be able to configure the corresponding function.   

Choose menu “Network  → WAN”, you can configure the IP parameters of the WAN on the 

screen below. 

1.  If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will 

automatically get IP parameters from your ISP. You can see the page as follows (Figure 

4-3): 

 

Figure 4-3 WAN – Dynamic IP 

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP 

address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP 

parameters from your ISP. Click the Release button to release the IP parameters.