TP-LINK TD-W8910GB User Manual

27 

The information of the figure shows above is same as the information in the Figure 4-3. 

Choose “Advanced Setup”Æ“LAN”, and you will see the LAN screen (shown in Figure 4-14)，the 
section allows you to configure the Router’s LAN ports settings. 

 

Figure 4-14 

¾

  IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN Interface. 

„

  IP Address: Enter the Router’s local IP Address, then you can access to the Web-based 

Utility via the IP Address, the default value is 192.168.1.1. 

„

  Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.255.255.0. 

¾

  Enable UPnP: If you need the UPnP function, select the check box to enable it. 

¾

  Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard 

Mode or Blocking Mode.