TP-LINK TD-W9980 User Manual

 

96 

Choose menu “Bandwidth Control”, and then you can configure the Upstream Bandwidth and 
Downstream Bandwidth in the next screen. The values you configure should be less than 
1000000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask your 
ISP for the total bandwidth of the egress and ingress. 

 

Figure 4-100 



  Enable Bandwidth Control: Check this box so that the Bandwidth Control settings can take 

effect. 



  Line Type: Select the right type for you network connection. If you don’t know how to choose, 

please ask your ISP for the information. 



  Total Upstream Bandwidth - The upload speed through the WAN port

.



  Total Downstream Bandwidth - The download speed through the WAN port. 



 

Description: This is the information about the rules such as address range.

 



  Priority: Priority of Bandwidth Control rules. ‘1’ stands for the highest priority while ‘8’ stands 

for the lowest priority. The total Upstream/ Downstream Bandwidth is first allocated to 
guarantee all the Min Rate of Bandwidth Control rules. If there is any bandwidth left, it is first 
allocated to the rule with the highest priority, then to the rule with the second highest priority, 
and so on. 



  Upstream bandwidth: This field displays the max and mix upload bandwidth through the 

WAN port, the default is 0. 



  Downstream bandwidth: This field displays the max and mix download bandwidth through 

the WAN port, the default is 0. 



  Status: The status of this rule either Enabled or Disabled. 



  Edit: Click Edit to modify the rule.   

1. Click 

Add New shown in

 

Figure 4-100, you will see a new screen shown in

Figure 4-101. 

2.  Enter the information as the screen shown below.