TP-LINK AC1750 User Manual
99
• Change a web browser or computer and log in again.
• Reset the modem router to factory default settings: With the modem router
• Reset the modem router to factory default settings: With the modem router
powered on, press and hold down the WPS/RESET button on the rear panel of the
modem router for 8 seconds until all LEDs turn back on momentarily, then release
the button.
modem router for 8 seconds until all LEDs turn back on momentarily, then release
the button.
Note: You’ll need to reconfigure the modem router to surf the Internet once the modem router is reset.
Open a web browser and log in again. If login fails, please contact the technical
support.
support.
T4 What can I do if I cannot access the Internet?
1 Check to see if all the connectors are connected well, including the telephone line,
Ethernet cables and power adapter.
2 Check to see if you can log in to the web management page of the modem router.
If you can, try the following steps. If you cannot, please set your computer referring
to T3 and then try to see if you can access the Internet. If the problem persists,
please go to the next step.
to T3 and then try to see if you can access the Internet. If the problem persists,
please go to the next step.
3 Consult your ISP and make sure all the VPI/VCI, Connection Type, account username
and password are correct. If there are any mistakes, please correct the settings and
try again.
try again.