TP-LINK TD-W8970 User Manual
TD-W8970
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Click the
Delete Selected button to delete the selected entries in the table.
The methods to add a new rule:
1. Click the
Add New button and the next screen will pop up as shown in Figure 4-72.
2. Give a name (e.g. Rule_1) for the rule in the
Description field.
3. Select a host from the
LAN Host drop-down list or choose “Add LAN Host”.
4. Select a target from the
WAN Host drop-sown list or choose “Add WAN Host”.
5. Select a schedule from the
Schedule drop-down list or choose “Add Schedule”.
6. In the
Action field, select Deny or Allow to deny or allow your entry.
7. In the
Status field, select Enabled or Disabled to enable or disable your entry.
8. In the
Direction field, select IN or OUT from the drop-down list for the direction.
9. In the
Protocol field, here are four options, All, TCP, UDP, and ICMP. Select one of them
from the drop-down list for the target.
10. Click the
Save button.
Figure 4-72
4.15.2 LAN Host
Choose menu “
Firewall” → “LAN Host”, and then you can view and set a Host list in the screen
as shown in Figure 4-73.
Figure 4-73
Description: Here displays the description of the host and this description is unique.
71