ZyXEL Communications NBG-416N User Manual
Chapter 17 Tools
NBG-416N User’s Guide
147
Note: Do not turn off the NBG-416N while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one
minute before logging into the NBG-416N again.
minute before logging into the NBG-416N again.
Figure 99 Configuration Restore Successful
The NBG-416N automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 100 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG-
416N IP address (192.168.1.1 in router mode). See
address of your computer to be in the same subnet as that of the default NBG-
416N IP address (192.168.1.1 in router mode). See
details on how to set up your computer’s IP address.
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
go back to the Configuration screen.
Figure 101 Configuration Restore Error
17.4.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration
information and returns the NBG-416N to its factory defaults.
information and returns the NBG-416N to its factory defaults.