ZyXEL Communications NBG-416N User Manual
NBG-416N User’s Guide
149
C
H A P T E R
1 8
Sys OP Mode
18.1 Overview
The Sys OP Mode (System Operation Mode) function lets you configure select the
device operation mode: Router, Access Point, Client Bridge or Universal
Repeater.
device operation mode: Router, Access Point, Client Bridge or Universal
Repeater.
See
for more information on which mode to choose.
18.2 General Screen
Use this screen to select how you connect to the Internet.
Figure 103 Maintenance > Sys OP Mode > General
The following table describes the labels in the General screen.
Table 59 Maintenance > Sys Op Mode > General
LABEL
DESCRIPTION
System Operation Mode
Router
Router
Use this mode if you want to use routing functions such as LAN
DHCP, NAT, firewall and so on on the NBG-416N (N). The NBG-
416N has separate LAN and WAN network IP addresses.
DHCP, NAT, firewall and so on on the NBG-416N (N). The NBG-
416N has separate LAN and WAN network IP addresses.
Access Point
Use this mode if you already have a Router (R) in your network
and you want to bridge all wired and wireless network
connections.
and you want to bridge all wired and wireless network
connections.