ZyXEL Communications P-661HNU-Fx User Manual
Chapter 2 Introducing the Web Configurator
ADSL Series User’s Guide
33
• Use the Network Map screen to check if your ZyXEL Device can ping the gateway and whether
it is connected to the Internet (
• Use the Control Panel to configure and enable ZyXEL Device features, including wireless
security, wireless scheduling and bandwidth management and so on (
).
2.3.3 Navigation Panel
Use this navigation panel to opt out of the User mode.
Figure 9
Control Panel
The following table describes the labels in this screen.
2.3.4 Network Map
Note: The Network MAP is viewable by Windows XP (need to install patch), Windows
Vista and Windows 7 users only. For Windows XP (Service Pack 2) users, you can
see the network devices connected to the ZyXEL Device by downloading the LLTD
(Link Layer Topology Discovery) patch from the Microsoft Website.
Note: Don’t worry if the Network Map does not display in your web browser. This feature
may not be supported by your system. You can still configure the Control Panel
) in the User Mode and the ZyXEL Device features that
you want to use in the Expert Mode.
When you log into the Network Configurator, the Network Map is shown as follows.
Figure 10
Network Map
The line connecting the ZyXEL Device to the gateway becomes green when the ZyXEL Device is able
to ping the gateway. It becomes red when the ping initiating from the ZyXEL Device does not get a
to ping the gateway. It becomes red when the ping initiating from the ZyXEL Device does not get a
Table 2
Control Panel
ITEM
DESCRIPTION
Home
Click this to go to the Login page.
Expert Mode
Click this to change to
Expert
mode and customize features of the ZyXEL
Device.
Logout
Click this to end the Web Configurator session.