ZyXEL Communications NBG410W3G Series User Manual

Chapter 8 Wi-Fi

NBG410W3G Series User’s Guide

"

If you do not enable any wireless security on your ZyXEL Device, your network 
is accessible to any wireless networking device within range.

Figure 89   WIRELESS > Wi-Fi > Security: None

The following table describes the wireless LAN security labels in this screen.

Static WEP provides a mechanism for encrypting data using encryption keys. Both the AP and 
the wireless stations must use the same WEP key to encrypt and decrypt data. 
Your ZyXEL Device allows you to configure up to four 64-bit, 128-bit or 152-bit WEP keys, 
but only one key can be used at any one time. 
In order to configure and enable WEP encryption, click WIRELESS > Wi-Fi > Security > 
Edit. 

Table 33   WIRELESS > Wi-Fi > Security: None  

Name

Type a name (up to 32 printable 7-bit ASCII characters) to identify this security profile.

Security Mode Select None to allow wireless clients to communicate with the access points without 

any data encryption.

Apply

Click Apply to save your customized settings and exit this screen.

Cancel

Click Cancel to exit this screen without saving.