ZyXEL Communications NBG410W3G Series User Manual

Chapter 8 Wi-Fi

NBG410W3G Series User’s Guide

Figure 87   WIRELESS > Wi-Fi > Configuring SSID

The following table describes the labels in this screen.

Click WIRELESS > Wi-Fi > Security to open the Security screen. Use this screen to create 
security profiles. A security profile is a group of configuration settings which can be assigned 
to an SSID profile in the Wireless Card screen.
The screen changes when you configure a security profile and varies according to the security 
modes you select. 

Table 30   WIRELESS > Wi-Fi > Configuring SSID

Name

Enter a name (up to 32 printable 7-bit ASCII characters) identifying this 

profile.

SSID

When a wireless client scans for an AP to associate with, this is the name that 

is broadcast and seen in the wireless client utility.
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the 

wireless LAN. 

Hide SSID

Select Disable if you want the ZyXEL Device to broadcast this SSID (a 

wireless client scanning for an AP will find this SSID). Alternatively, select 

Enable to have the ZyXEL Device hide this SSID (a wireless client scanning 

for an AP will not find this SSID).

Security

Select a security profile to use with this SSID profile. See 

 for more information.

RADIUS

This displays N/A if the security profile you selected does not use RADIUS 

authentication. See 

 for more information.

This displays Radius Configuration if you select a security profile that uses 

RADIUS authentication. Click Radius Configuration to go to the RADIUS 

screen where you can view and/or change the RADIUS settings.
See 

 for more information.

Enable MAC Filtering

Select Enable from the drop down list box to activate MAC address filtering.

Apply

Click Apply to save your customized settings and exit this screen.

Cancel

Click Cancel to exit this screen without saving.