ZyXEL Communications NBG-417N User Manual
Chapter 16 Bandwidth Management
NBG-417N User’s Guide
138
The following table describes the labels in this screen.
16.5 Advanced Configuration
Use this screen to configure bandwidth managements rule for the pre-defined services or
applications.
applications.
Use this screen to configure bandwidth managements rule for specific protocols on an IP or IP
range.
range.
Note: This screen contains the Priority Queue and Bandwidth Allocation tables.
Though both tables are described in this section, you can only apply the rules in one
table. Fill out the table of the Bandwidth Management Type you selected in
Table 55
Management > Bandwidth MGMT > General
LABEL
DESCRIPTION
Service Management
Bandwidth
Management Type
Management Type
This field allows you to have NBG-417N apply bandwidth management.
Select Priority Queue or Bandwidth Allocation to enable bandwidth
management.
management.
•
Select Priority Queue to allocate bandwidth based on the pre-defined
priority assigned to an application. Refer to
•
Select Bandwidth Allocation allocate specific amounts of bandwidth to
specific protocols on an IP or IP range. Refer to
.
Select Disable if you do not want to use this feature.
Total Bandwidth Setting. The fields below appear when you enable Bandwidth Management.
Uplink
Type or select the total amount of bandwidth (from 64 Kbps to 30 Mbps) that
you want to dedicate to uplink traffic.
you want to dedicate to uplink traffic.
If you type the amount of bandwidth, the selection automatically becomes
User Defined. If you select the amount of bandwidth, the field automatically
displays the value in Kbps.
User Defined. If you select the amount of bandwidth, the field automatically
displays the value in Kbps.
This is traffic from LAN/WLAN to WAN.
Downlink
Type or select the total amount of bandwidth (from 64 Kbps to 30 Mbps) that
you want to dedicate to downlink traffic.
you want to dedicate to downlink traffic.
If you type the amount of bandwidth, the selection automatically becomes
User Defined. If you select the amount of bandwidth, the field automatically
displays the value in Kbps.
User Defined. If you select the amount of bandwidth, the field automatically
displays the value in Kbps.
This is traffic from WAN to LAN/WLAN.
Apply
Click Apply to save your customized settings.
Reset
Click Reset to begin configuring this screen afresh.