ZyXEL Communications NBG460N User Manual
ENGLISH
4
The LEDs
Look at the LEDs (lights). When you connect the power, the power LED (
) blinks and
stays on once the device is ready.
The LAN (
) and WAN (
) LEDs turn on if the corresponding connections
are properly made.
V
If an LED does not turn on, check your connections. If this doesn’t help,
disconnect the NBG460N from its power source, wait for a few seconds and
turn it back on.
disconnect the NBG460N from its power source, wait for a few seconds and
turn it back on.
2 Accessing the Web Configurator
Default Login Information
1 Launch an Internet browser such as Internet Explorer. Enter “http://192.168.1.1” as
shown below.
IP address
http://192.168.1.1
administrator password
1234